Simply put, the Egg Not is a squash tail, narrower nose, version of our eGG. With the increasing popularity of mid size boards, we decided it was more or less a given that we offer a squash tail version of our eGG. Outline; Moderate width in the center. The nose in just over 15 inches. The tail is just under 15. The tail block, one inch up’ is approximately 7”. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail.
Rocker on the front end is pretty relaxed. Helps with paddle speed, wave catching, and overall glide. Back in the business zone, the curve is a bit above average, yet subtle. Clean, smooth, no breaks, but plenty. It helps to tighten the arc of your turns without giving up speed. Bottom; entry is almost flat. A little release out towards the rails. In the mid section, on the shorter boards there is a light single that blends into a subtle double vee that peaks about 2 feet up. Backs off to a very light break between and aft the fins. On bigger boards, app 21.75 and wider, the bottom becomes slightly more convex. Thickness; A little on the thin side for a board this size. Leaner rails. Easier to put in the water. Holds better in bigger surf.
Fins: It’s your call. For a higher performance feel I’d recommend 4. For a cruisier, more traditional feel, 2 plus one or single. It’s a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but still be loose enough to turn with ease. When the surf gets a bit bigger, it still works...surprisingly well! More waves equals more fun!
Start a chat with us now to help you find your magic stick.
Do you want a custom? ASK YOUR SHAPER below.
Also check out the Heckler. For more surfboards check out the rest of the boards from the Rusty Surfboards collection here. We now ship to most locations in the Middle East, the United Arab Emirates, Russia ans Sri Lanka.
*prices are subject to change without notice
| Length | Width | Thickness | Volume |
| 6'8" | 20.5" |
2.7" |
41 L |
| 6'9" |
20.63" |
2.71" |
42 L |
| 6'10" |
20.75" |
2.72" |
43 L |
| 6'11" |
20.87" |
2.73" |
44 L |
| 7'0" |
21.0" | 2.74" |
45 L |
| 7'1" |
21.13" | 2.75" |
46 L |
| 7'2" |
21.25" |
2.76" |
47 L |
| 7'3" |
21.37" |
2.77" |
48 L |
| 7'4" |
21.5" |
2.78" |
49 L |
| 7'5" |
21.63" |
2.79" |
50 L |
| 7'6" |
21.75" |
2.80" |
51 L |
| 7'7" |
21.87" |
2.83" |
52.4 L |
| 7'8" |
22.0" |
2.86" |
53.8 L |
| 7'9" |
22.13" |
2.89" |
55.3 L |
| 7'10" |
22.25" |
2.93" |
57 L |
| 7'11" | 22.38" | 2.96" | 58.5 L |
| 8'0" | 22.5" | 3.0" | 60.5 L |
All orders do not include shipping. Please speak to the team for the best shipping options.
FAQ
PURCHASING
Q1. What currency will I pay in?
United Arab Emirates Dirhams
Q2. Is your website secure?
Yes, of course. We use Shopify payments to process our credit card transactions which is PCI DSS compliant. The payment card industry data security standard (PCI DSS) is an information security standard for organisations that handle credit card and debit card information. This level of security is processed under the same standards as banks security.
Q3. What payment methods can I use?
We accept:
- Visa
- Mastercard
- American Express
- Apple Pay
- Google Pay
If you are having trouble processing a single payment connect to the support team.
Q4. Can I pay using split payments?
Yes, we offer a split payments service. Once you have decided what model you would like to order please send us an email to request the split payments option at online@rustysurfboards.me
You will have 45 days from the board completion to finalise payment, otherwise the transaction will be cancelled. But rest assured, we will contact you before it gets to that point.
We are always ready to answer any further questions regarding the split payments service.
Q5. Can I pay a deposit to start the manufacturing of my board and then pay the remaining balance when the board is completed?
Yes, you can. The deposit is non-refundable once the manufacturing process has started. Please follow instructions in previous question.
For all questions, advice and support get in touch by starting a chat or send us an email at online@rustysurfboards.me
SHOPPING
Q6. Where can I buy Rusty Surfboards?
You can only purchase Rusty Surfboards ONLINE from this Official Rusty Surfboards ME website if you are based in UAE, Middle East, Turkey or Russia.
Q7. Can I buy Rusty Surfboards in-store?
You can only purchase ONLINE.
Q8. I am not sure what surfboard model will best suit my surfing needs or ability. What should I do?
We have a team of professionals who help surfers every day to find that magic sled. So where you are new to the sport or you are a seasoned pro we can help. If you don't find what you are looking for, no problem, we can build you a custom. Connect to a Rusty Professional via chat or email.
Q9. Do you have a board volume guide, what size board should I order?
Yes, we have a volume recommendations guide on every surfboard product page. We understand this selection process can be a challenge, so speak to a professional in our team. They can help advise you on volume, dimensions, models, specifications to suit your skill level, waves you are riding and any other special requirements.
Q10. What surfboard constructions do you offer?
- PU
- EPS
- Epoly
- Torsion Spring
If you would like to discuss what construction will best suit your requirements reach out to one of our professionals.
Q11. Do you offer an environmentally friendly blank option?
Yes, Torsion Spring is 100% eco-board certified. So you can order the latest high-performance surfboards that have much less of an environmental impact.
Q12. Can I add extra fin plugs to my custom board so I can ride it as a thruster or a quad?
Yes, you can have a 5 fin setup on the majority of the surfboard models.
Q13. Do you have a custom spray examples list?
Yes, we have a catalogue of sprays and patterns you can choose from. Just let us know if this is of interest to you.
Q14. Can I have carbon patches or strips added to my board?
Yes, you can. Many of our board models have carbon as standard, but you can request extra carbon.
Q15. Do you offer a polished gloss finish to my custom board?
Yes, you can request a polished gloss finish. We offer other finishes to custom boards.
Q16. Can I have S-Cloth placed on my custom board?
Yes, S-Cloth is available and can be placed on all custom orders.
Q17. Do you offer channels bottoms on custom boards?
Channels are available. You will need to speak to the shaper for guidance with your requirement.
Q18. I have videos of me surfing, can I upload this content to help the shaper understand my ability and the waves I am surfing?
Yes, if you follow the custom board builder form you can upload two videos and at the end. Click the CUSTOM tab at the top of the page.
Q19. Can I view a product before purchasing?
Possibly. Just reach out and we can let you know what boards are available for you to preview - online@rustysurfboards.me, or start a chat
Q20. When do you add new products to the website?
We are constantly producing new boards and models so ensure you subscribe to our newsletter, follow us on social media and constantly check our website. You can always chat with us.
For all questions, advice and support get in touch by starting a chat or send us an email at online@rustysurfboards.me
